 |
 |
| HOME | TECHNOLOGY SUPPORTS |
|
 |
| Failure conditions |
Arising reason |
Solution |
| Great noise |
hard articles fall into
accidentally, such as metal
products like spoon or bottlecap
|
Take away switch firstly, after the grinding tray stops rotating, check the disposer by long arm clip and remove the eyewinker. |
| Motor stop |
Power overload or hard article falling |
First turn off food waste disposer and the flow in order to avoid injury; after unplug the power plug, check the fuse box, replace the burned fuse or inspect breaker. |
| Slow discharge |
Pipes may be blocked |
Remove by plumber's special elastic rod or tape measure |
| Emit strange smell |
Inadequate washing results in food residue after treatment remaining in the cavity of food waste disposer |
Scrub pad is used to clean accumulated food debris inside and outside the hatch of food waste disposer, cover the switch knob, inject half-full tepefaction water, add soda power, put switch knob from OFF position of the tank flange and rotate clockwise to ON position, start the food waste disposer, so that can thoroughly wash the inside of food waste disposer, remove the residual slag, the soda power is able to fresh the smell of food waste disposer. |
Tips for User£º
1. When you try to take obstruction or other items out from the cavity of food waste disposer, you must first turn off the power switch and unplug the power plug.
2. Don't put insert hands into the food waste disposer, if need to remove food eyewinker from food waste disposer, you can use the long-arm clamp or pliers.
3. When don't need to use the food waste disposer, You should cover switch knob, so as the eyewinker won't fall into the disposer. |
|
